How to Use Bissell CrossWave: A Comprehensive Guide

How to Use Bissell CrossWave: A Comprehensive Guide

The Bissell CrossWave is a revolutionary cleaning tool that combines the functions of a vacuum and a mop, making it the perfect solution for busy households. With its advanced technology and ease of use, the Bissell CrossWave ensures efficient and thorough cleaning on various floor types. In this article, we will delve into the details of how to use the Bissell CrossWave effectively to keep your floors spotless and your home looking its best.

How to Use Bissell CrossWave

The Bissell CrossWave is an all-in-one cleaning machine designed to simplify your cleaning routine. Below, we’ll explore each step of using the Bissell CrossWave to ensure you get the best results every time.

Unboxing and Assembling the Bissell CrossWave

Before you get started, let’s talk about unboxing and assembling your Bissell CrossWave:

  1. Unboxing the Bissell CrossWave: When you receive your Bissell CrossWave, carefully unpack all the components, including the machine, brush roll, cleaning solution, and user manual.
  2. Assembling the Bissell CrossWave: Follow the instructions in the user manual to assemble the machine properly. It’s a simple process that should only take a few minutes.

Preparing the Bissell CrossWave for Use

Now that your Bissell CrossWave is assembled, it’s time to prepare it for cleaning:

  1. Choose the Right Cleaning Solution: The Bissell CrossWave works with specialized multi-surface cleaning solutions. Make sure to select the appropriate solution for the type of floor you are cleaning.
  2. Fill the Water Tank: Remove the water tank from the machine and fill it with clean, warm water. Refer to the user manual for the correct water level.
  3. Add the Cleaning Solution: After filling the water tank, add the recommended amount of cleaning solution. Be cautious not to overfill it.

Operating the Bissell CrossWave

With the preparation done, it’s time to start cleaning:

  1. Power On the Machine: Plug in the Bissell CrossWave and turn it on using the power button.
  2. Select the Floor Type: Adjust the settings on the machine to match the floor type you are cleaning (hardwood, tile, carpet, etc.).
  3. Hold the Trigger: To dispense the cleaning solution and start the brush roll, hold down the trigger located on the handle.
  4. Push and Pull Motion: Push the Bissell CrossWave forward to clean the area, and then pull it back to suction up the dirty water and debris. Repeat this motion until the area is thoroughly cleaned.
  5. Cleaning Corners and Edges: For corners and edges, use the edge cleaning bristles on the foot of the machine. This ensures a comprehensive clean in all areas.

Maintaining the Bissell CrossWave

To keep your Bissell CrossWave in top condition, regular maintenance is essential:

  1. Empty the Dirty Water Tank: Once you finish cleaning, detach the dirty water tank and empty it into the sink or toilet. Rinse the tank thoroughly before reattaching it.
  2. Clean the Brush Roll: Over time, debris and hair may accumulate on the brush roll. Remove it and clean it using scissors or a brush, as necessary.
  3. Replace Filters: Check and replace the filters regularly as per the user manual’s guidelines. Clean filters ensure optimal performance.

Tips for Effective Cleaning with the Bissell CrossWave

To make the most of your Bissell CrossWave, consider these expert tips:

  1. Vacuum First: Before using the CrossWave, vacuum the area to remove larger debris. This ensures the machine focuses on deep cleaning.
  2. Use Recommended Cleaning Solutions: Stick to the Bissell-approved cleaning solutions for best results and to avoid damaging the machine.
  3. Clean Regularly: Incorporate Bissell CrossWave into your regular cleaning routine for consistently clean floors.
  4. Store Properly: When not in use, store the Bissell CrossWave in a dry and safe place.

How To Get To Celadon City Your Ultimate Guide To Exploring The Lush Metropolis


Q: Can I use the Bissell CrossWave on all types of floors?

A: Yes, the Bissell CrossWave is designed for use on multiple floor types, including hardwood, tile, laminate, and carpet.

Q: How often should I clean the Bissell CrossWave after use?

A: It’s best to clean the Bissell CrossWave after each use to maintain its performance and longevity.

Q: Can I use the Bissell CrossWave without the cleaning solution?

A: While it is possible to use water alone, we recommend using the appropriate Bissell cleaning solution for optimal results.

Q: Is the Bissell CrossWave suitable for pet hair?

A: Absolutely! The Bissell CrossWave is highly effective at picking up pet hair and other debris.

Q: Can I wash the brush roll in the dishwasher?

A: No, the brush roll is not dishwasher safe. Clean it manually using scissors or a brush.

Q: Does the Bissell CrossWave have a warranty?

A: Yes, Bissell offers a limited warranty on the CrossWave. Check the user manual for specific details.


The Bissell CrossWave is a game-changer in the cleaning world, simplifying the way we maintain our floors. With its versatile functions and user-friendly design, it is a must-have for any household. By following the steps outlined in this guide and employing the expert tips provided, you can achieve spotless and fresh floors effortlessly. Say goodbye to tedious cleaning and embrace the convenience of the Bissell CrossWave!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *