Common Causes and Solutions of Leaking Shower

Shower leaks left unattended are not only inconvenient but also costly to fix. Sometimes, you can set the leak yourself without hiring an expert. However, you should be able to recognise issues that go beyond your plumbing expertise. Installing a temporary remedy before having a professional fix may prevent the bad repercussions of a leaky shower.

Thus, if you:

• Think your shower is leaking;
• I can’t seem to figure out where it’s coming from;
• want to protect your property from significant harm.

Then you should read this post! To learn the cause of your shower’s leak, keep reading. 

Shower Leaking Signs

Plumbers in Point Cook say finding the leak source is the first step in fixing it since water leaks may cause significant property damage if ignored for too long. We advise you to learn how to inspect your bathroom for leaks. You may tell if your shower is leaking by looking for a few obvious signs. Search your home for the following indications:

Separate tiles: 

Due to frequent exposure to water, the grout and glue holding the tiles together may eventually become loose. The tiles can come off as a result of this. 

Mildew and mould: 

Mould is more likely to grow in your bathroom when the climate is humid and warm. That often occurs when water droplets from a leaking shower don’t dry and remain in the bathroom’s corners, providing ideal circumstances for mould growth. The grout lines between tiles and caulked seams are the most typical locations for fungal development.

Visible stains on the floor and walls: 

You could see flaws on the walls and floors of your shower, depending on where it is located. Water residue and rust are the most typical stains you could encounter when your leakage isn’t serious. If the issue is considerably worse, you can notice stains developing on the floor of your house below the bathroom.

Is a Leaking Shower Dangerous?

The degree of risk depends on how much harm the leak is doing to your home’s structure, but this does not imply you should wait. A leaky shower should be mended immediately to avoid emergencies and expensive repairs. Increased water costs brought on by light drip eventually lead to bigger issues. The problem begins in the walls, where the moisture builds up. 

Water leaks that penetrate the walls will eventually reach the foundation, which is often not waterproof. When water enters wooden constructions, the building is vulnerable to invasion by pests and decay. If left unchecked, water-damaged structures may eventually collapse.

As you can see, water damage from a leaky shower may be severe; thus, promptly taking care of it can save more expenses and safeguard your family from potential risks.

Is it safe to use an electric shower that leaks?

In short, the answer is no, it is not secure. The incompatibility of electricity with water is a well-known phenomenon. If you see any leaks in your electric shower, immediately stop the power and call a plumbers in Point Cook. DIY repairs can be risky if you don’t understand how the inner workings of your electric shower work. You’re in good hands since experts are trained to manage even the most complicated shower leaks. 

How to Stop Your Shower from Leaking and Why?

The most frequent causes of shower leaks are discussed below, along with solutions. Keep in mind that some solutions need some level of plumbing expertise. Please don’t try to do any repairs unless you are certain of your ability to work with plumbing.

1. Showerhead that is clogged or malfunctioning 

If you want your pipes and bathroom fixtures to be clog-free, the plumbers in Hoppers Crossing suggest using water-softening plumbing. The two possible causes of a dripping showerhead are limescale accumulation and a defective rubber washer, a round rubber component that insulates your showerhead. 

The solution: 

Step 1 – Depending on the style of your shower, separate the showerhead from the hose or the shower wall;

Step 2 – Spray a limescale-removal solution on the showerhead and let it sit for a while to clear the water film;

Step 3 – A cleaning brush can help scrub it completely after 10 minutes;

Step 4 – Thoroughly rinse the showerhead with water and allow it to completely dry;

Step 5 – Examine the rubber washer’s condition as the showerhead dries;

Step 6 – Replace it with a new one if you find any defects, such as cracks or rips. They are simple to locate at any hardware shop;

Step 7 – To provide another seal, apply some adhesive tape to the connection’s threads;

Step 8 -Reassemble all the components.

2. Damaged shower hose

The cause is that shower hoses are subject to normal wear and strain. You may occasionally need to replace them because of this. 

The solution: 

Step 1 – Remove the rubber washer and unplug the old hose from the tap. Keep the washer since you must attach it to the new hose; if it is broken, purchase a replacement;

Step 2 – Remove the washer once more after removing the showerhead. For two joints, you need two washers;

Step 3 – Attach the new hose and hand-tighten it while placing washers on both sides.

3. A defective shower mixer tap

The worn rubber seal is the primary cause of most shower mixer tap leaks. The broken seal ring must be replaced to stop the leak, which may be found between the mixer’s neck and spout.

The solution: 

Step 1 – Disconnect the hot and cold water lines and empty the standing water;

Step 2 – Take away the mixer spout;

Step 3 – Find the round rubber seal within the mixer’s neck;

Step 4 – Remove the old seal and install the new one;

Step 5 – Reconnect the mixer’s spout;

Step 6 – Turn on the water and analyse the water flow in step six.

Get Your Shower FIxed with Your Local Plumbing 

Leaking showers can stem from various factors, such as deteriorated grout, damaged seals, or poor installation. These issues can lead to water wastage, structural damage, and mould growth. Effective solutions encompass regular maintenance, proper installation by professionals, and utilisation of quality materials. Timely repairs, vigilant inspection, and consistent upkeep are essential to prevent leaks. By addressing the causes and implementing proactive measures, we can mitigate the detrimental effects of leaking showers and ensure a sustainable and problem-free bathing environment.